Power washing and pressure washing both blast surfaces with high-pressure water. The usual difference is heat: in the trade, “power washing” tends to mean the water is heated, while “pressure washing” means cold water at high pressure. Most people use the two words for the same job, though, and on a Victoria home the bigger question is whether a surface should get high pressure at all.
That’s the part that matters for your siding, your roof and your driveway. Some of them want a pressure washer. Some of them are better off with a low-pressure soft wash.
What do people mean when they say power washing?
Ask three companies and you’ll get three answers. Some use “power washing” for hot water, some for anything with a pressure washer, and a few mean the same thing as soft washing. So when you get a quote, ask two plain questions: how much pressure will touch my house, and what’s going on the surface besides water.
Which surfaces get which method?
Hard surfaces that can take it get the pressure washer. Soft or painted surfaces get a soft wash with low pressure and a cleaning solution.
| Surface | Method we use | Why |
|---|---|---|
| Concrete driveways and walkways | Pressure washer | Takes the pressure; lifts moss, algae and grime |
| Interlocking pavers and stone | Pressure washer | Cleans the surface and the joints, where the moss sits |
| Asphalt | Pressure washer | Quicker than pavers, so it costs a little less per square foot |
| Wood and composite decks | Pressure washer at safe settings | Removes green growth without chewing the boards |
| Vinyl, Hardie board, stucco and wood siding | Soft wash | Low pressure and a cleaning solution protect paint and siding |
| Roofs | Soft wash, never high pressure | High pressure and metal brushes damage shingles |

Why doesn’t a Victoria roof get pressure washed?
Because the pressure does the damage the moss was threatening to do. Alex soft washes roofs with low pressure and a moss treatment, and he’s blunt about the alternative: a cheap job is usually someone with a metal brush, rushing, often without fall protection. That’s how shingles get stripped.
A soft wash takes longer and costs more than a quick scrub. Roof cleaning starts at $600, and a 2,000 sq ft roof runs $626 with light moss and about $1,000 with heavy moss. The moss itself is no small thing here. An average Victoria roof gives up 20 to 40 kg of it, and Alex’s record is close to 100 kg off a roof of about 2,500 sq ft. If you’d rather try it yourself first, here’s how to remove moss from a roof without damaging it.
Is soft washing better than pressure washing a house?
For siding, yes. A soft wash uses low pressure and a cleaning solution, so the paint and siding come through undamaged. A pressure washer on painted siding or old cedar can lift paint and push water where it doesn’t belong.


That goes double for older homes. If yours has original wood siding, read whether house washing can damage heritage siding before anyone points a wand at it.
What does pressure washing cost in Victoria?
Shine Pros charges a $225 minimum to set up, then $0.35 to $0.55 per square foot depending on the surface. Pavers cost more than asphalt because they take longer. A whole house with everything done, driveway, walkways and siding, usually runs $800 to $900.
| Job | Price |
|---|---|
| Pressure washing minimum | $225 |
| Pressure washing by surface | $0.35 to $0.55 per sq ft |
| House wash, 1,500 sq ft single-storey | $465 |
| House wash, 3,500 sq ft two-storey | $775 |
| Whole house, everything | $800 to $900 |
There’s more detail in the pressure washing cost guide and the house washing cost guide.
Why Victoria homes need the right method
Victoria’s wet winters grow moss and algae on everything that stays damp: north-facing siding, shaded pavers, roofs under trees. The fix isn’t more pressure. It’s matching the method to the surface, so the driveway gets properly blasted and the siding and roof get a soft wash that kills growth without wrecking what’s underneath.
What happens on the day
Shine Pros is Alex and Emma, a husband and wife crew. The person who quotes your job is the one doing it, and at the end you walk the property together before they pack up. They clean up properly too: no moss left in the garden beds, nothing left on the driveway.
Common questions
Is power washing the same as pressure washing?
Mostly. Both use high-pressure water, and in the trade “power washing” usually means the water is heated. Most people use the words for the same job, so ask any company how much pressure will touch your house.
When should you not power wash your house?
Skip high pressure on painted siding, wood and cedar siding, stucco and roofs. Those get a soft wash: low pressure plus a cleaning solution. High pressure can strip paint and damage shingles.
How much does it cost to pressure wash a 2,000 sq ft house in Victoria?
A house wash at Shine Pros is $465 for a 1,500 sq ft single-storey home and $775 for a 3,500 sq ft two-storey, so a 2,000 sq ft home falls between the two. Adding the driveway and walkways usually brings a whole house to $800 to $900.
Can you pressure wash pavers in Victoria?
Yes. Pavers take the pressure washer well and come out cleaner in the joints, where moss sits. They take longer than asphalt, so they cost a little more per square foot.
Siding, roofs and anything painted get a soft wash; concrete, pavers and asphalt get the pressure washer. See how soft washing in Victoria works, call (778) 743-4377, or request a free quote online.




